Search Knowledge Base by Keyword
Communication protocols
-
CANopen on Technosoft drives
-
Ethernet on Technosoft drives
-
RS232
-
Technosoft CAN protocols
-
Basic concepts - architecture
-
Basic concepts - architecture
- CAN interfaces that are supported by Technosoft software tools [GB / CM]
- How to change the default CAN baud rate [II]
- The difference between TMLCAN and TechnoCAN [II]
- TML message timing over various networks and protocols: CAN (TMLCAN / TechnoCAN) and RS232 [II]
- TMLCAN vs. TechnoCAN vs. CANopen [II]
-
-
TMLCAN
-
Drive Commissioning
-
Communication Setup
-
Drive Setup
-
Motor Setup
- DC brushed / brushless motors with analogue (potentiometer) feedback
- Details about the Incremental Encoder and Digital Halls configuration - Motor Setup [GB/CM]
- How the software filtering of the encoder inputs works
- How to check if the Hall sensors are linear (analog) or digital [II]
- Speed control of a brushless motor equipped only with digital Hall sensors
-
Protections
- Brake resistor [GB/CM]
- Brief description of the Drive and Motor protections [GB]
- Control Error Protection – Drive Setup [GB/CM]
- How do over-current and i2t protections work? [GB/CM]
- I2t Protection - Drive Setup [GB/CM]
- Over Current Protection – Drive Setup [GB/CM]
- The Integral Limit parameter [GB]
- What can trigger the "Control error" [GB]
Hardware questions/issues
-
Autorun mode
-
Others
-
Recommended connections
-
Analog / Digital I/Os
-
Communication networks
-
Motor/Feedback connections
-
Supply connection
-
-
Sensor interfacing
Motion Programming
-
Application Download
-
EasyMotion Studio
-
Assignment and data transfer
-
Command Interpreter
-
Control mode
-
Control Panel / Loger / Scope
-
Drive Status / Recovery from error
-
Events Handeling
-
External reference
-
Functions
-
Homing procedures
-
I/Os
-
Interrupts
-
Memory Settings
-
Motion profiles
-
Multi-axis
-
Others
-
Starting up (basic concepts)
- Can I connect two motors in parallel? [GB]
- How to archive a TML project in EasyMotion Studio [GB]
- How to restore an EasyMotion Studio project archive [GB]
- How to update the firmware of a Technosoft drive/motor [GB/CM]
- The relationship between the speed resolution and the SLOW LOOP sampling period [II]
- TML Registers, Parameters and Variables
-
-
TML
-
Basic Concepts
-
Functions
-
I/Os handeling
-
Motion Commands
-
Motion Profiles
-
Others
-
Program Execution
-
Syntax
-
TML Data
-
TML Environment
-
TML Interrupts
-
TML Registers
-
TML Variables
-
-
TML_LIB Motion Libraries
-
Basic concepts
-
Communication channels
-
Drive Status / Recovery from error
-
Drive/Motor Setup
-
Motion programming
-
Others
-
TML functions calling
-
Use of TML_LIB vs. EasyMotion Studio
-
RS232
+41 (0)32 566 70 43
Tel.: +49 (0)8331 924 7293
Mobile: +49 (0)170 521 0007
Tel.: +49 (0)7156 308 8018 .
Mobile: +49 (0)173 772 0003
