About Valentina Dumitru

This author has not yet filled in any details.
So far Valentina Dumitru has created 136 blog entries.
6 04, 2021

Intelligent drives with integrated motion controller synchronize automatically without a master

2021-04-06T08:38:54+00:00

A dedicated programming language helps implement complex control concepts Numerous applications in different fields require compact drives in order to carry out precisely defined axis movements in sequence or in parallel. This interaction is usually coordinated via a master unit, which gives the individual motors appropriate commands. However, it is necessary to align [...]

Intelligent drives with integrated motion controller synchronize automatically without a master2021-04-06T08:38:54+00:00
23 03, 2021

We’re exibiting at AUTOMATE FORWARD 2021- JOIN US!

2021-03-23T13:12:23+00:00

Join us March 22-26 for Automate Forward 2021 virtual trade show! Exhibiting in a virtual environment has its challenges but we don't want to miss this opportunity to meet, chat, and show you our latest technology just as we would have in person. Registration is FREE! See you soon! Visit Technosoft  at [...]

We’re exibiting at AUTOMATE FORWARD 2021- JOIN US!2021-03-23T13:12:23+00:00
7 03, 2021

Home the axis to the middle of the working area

2021-03-07T15:22:07+00:00

This application note describes how to implement a homing routine, using a function that aligns the load to the middle of the working area. The homing procedure follows the algorithm below: move negative until the negative limit switch is reached; stop and set the current position to 0 [IU]; move positive until the positive limit [...]

Home the axis to the middle of the working area2021-03-07T15:22:07+00:00
5 03, 2021

How to use the predefined homing methods

2021-03-07T14:13:55+00:00

The homing methods are special functions used to align the load with a known position. This is necessary in case of the applications where the motion is restricted and the system is not equipped with an absolute position sensor. This application note describes how to use the homing methods predefined in Easy Motion Studio and [...]

How to use the predefined homing methods2021-03-07T14:13:55+00:00
5 03, 2021

Start modes description

2021-03-07T17:18:10+00:00

This application note describes the available start modes. The start modes are special procedures required to align the magnetic fields in the motor. Start modes description The preferred start mode can be selected during the setup phase, trough the “Drive Setup” dialogue. Figure 1. Start mode selection   Depending on the system configuration (drive model, [...]

Start modes description2021-03-07T17:18:10+00:00
15 03, 2019

Shanghai Moons’ acquires Technosoft Motion

2021-06-25T13:15:01+00:00

On March 13th, MOONS' Electric, (hereafter referred to as MOONS'), acquired 100% of the share capital of Technosoft Motion, which became a wholly owned subsidiary of MOONS'. MOONS' is a worldwide leading manufacturer of motion products. With the culture of "Closer to Customers". MOONS' has continuously worked on creating and upgrading its operating network to [...]

Shanghai Moons’ acquires Technosoft Motion2021-06-25T13:15:01+00:00
1 08, 2018

Technosoft Drives with Integrated Safety

2019-07-02T07:56:31+00:00

TECHNOSOFT is pleased to inform all its partners that selected products of the iPOS servo drive family now benefit from the certification for the STO (Safe Torque Off) capability. As part of the company’s effort to continually improve our product offering while meeting market demands for integrated safety, TECHNOSOFT can now propose two versions [...]

Technosoft Drives with Integrated Safety2019-07-02T07:56:31+00:00
2 07, 2018

iPOS4808 VX – Compact High Power Density Servo Drive

2019-06-21T13:43:41+00:00

T he iPOS4808 VX intelligent servo drive is a plug-in card from Technosoft’s iPOS line of drives that can control any DC brush, rotary / linear brushless, or step motor up to 400 W. Executing locally programmed functions or instructions received from various communication networks, the drive interfaces with typical feedback devices like incremental [...]

iPOS4808 VX – Compact High Power Density Servo Drive2019-06-21T13:43:41+00:00
2 11, 2017

iPOS2401 MX-CAT World’s smallest EtherCAT drive!

2019-10-31T09:38:05+00:00

H igh-end positioning applications where space is critical find now an optimal solution in the incredibly small iPOS2401 servo drive from Technosoft, with an EtherCAT interface. Small and light (19 x 50 x 10 mm, and weighing only 12 g) the iPOS2401 MX-CAT drive can be used in high precision positioning applications with any motor [...]

iPOS2401 MX-CAT World’s smallest EtherCAT drive!2019-10-31T09:38:05+00:00
©  TECHNOSOFT ,   All Right Reserved  |  Privacy Policy  | Site map