Join us March 22-26 for Automate Forward 2021 virtual trade show! Exhibiting in a virtual environment has its challenges but we don't want to miss this opportunity to meet, chat, and show you our latest technology just as we would have in person. Registration is FREE! See you soon! Visit Technosoft at [...]
This application note describes how to implement a homing routine, using a function that aligns the load to the middle of the working area. The homing procedure follows the algorithm below: move negative until the negative limit switch is reached; stop and set the current position to 0 [IU]; move positive until the positive limit [...]
The homing methods are special functions used to align the load with a known position. This is necessary in case of the applications where the motion is restricted and the system is not equipped with an absolute position sensor. This application note describes how to use the homing methods predefined in Easy Motion Studio and [...]
This application note describes the available start modes. The start modes are special procedures required to align the magnetic fields in the motor. Start modes description The preferred start mode can be selected during the setup phase, trough the “Drive Setup” dialogue. Figure 1. Start mode selection Depending on the system configuration (drive model, [...]
Samples of "Opération Soyons Solidaires" in the Media
On March 13th, MOONS' Electric, (hereafter referred to as MOONS'), acquired 100% of the share capital of Technosoft Motion, which became a wholly owned subsidiary of MOONS'. MOONS' is a worldwide leading manufacturer of motion products. With the culture of "Closer to Customers". MOONS' has continuously worked on creating and upgrading its operating network to [...]
TECHNOSOFT is pleased to inform all its partners that selected products of the iPOS servo drive family now benefit from the certification for the STO (Safe Torque Off) capability. As part of the company’s effort to continually improve our product offering while meeting market demands for integrated safety, TECHNOSOFT can now propose two versions [...]
T he iPOS4808 VX intelligent servo drive is a plug-in card from Technosoft’s iPOS line of drives that can control any DC brush, rotary / linear brushless, or step motor up to 400 W. Executing locally programmed functions or instructions received from various communication networks, the drive interfaces with typical feedback devices like incremental [...]
H igh-end positioning applications where space is critical find now an optimal solution in the incredibly small iPOS2401 servo drive from Technosoft, with an EtherCAT interface. Small and light (19 x 50 x 10 mm, and weighing only 12 g) the iPOS2401 MX-CAT drive can be used in high precision positioning applications with any motor [...]
The company Technosoft , based in Neuchâtel,Switzerland, has released the iPOS2401 MX , an intelligent drive with integrated motion controller offering an optimal solution for positioning applications where space is critical (19 x 46 x 8 mm). Due to its innovative motor control architecture,the iPOS2401 represents a universal control solution for a complete category [...]
