|
If the CAN-bus communication does not operate properly, EasyMotion Studio will issue an error message and you’ll see displayed on the status bar (the bottom line) of the EasyMotion Studio the text “Offline”.
| 1. | If the error message starts with “WinSock: ” the error is related to Ethernet communication. Click “Cancel” button, then check the following: |
| • | If the Ethernet adapter is correctly supplied |
| • | In Communication | Setup dialogue, if the address set at Port is identical with the one set with Microsoft Telnet Client |
| 2. | If the error message doesn’t start with “WinSock: ” the error is related to the serial RS-232 communication. To fix the problem see RS-232 Communication Troubleshoots . |
| 3. | If the communication operates usually but gives communication errors from time to time, in “Communication | Setup” click on Advanced… button and increase the Receive timeout interval parameter. Note that for this parameter, usually, the default value does not need to be modified. |
After you fix the problem, execute menu command “Communication | Refresh” to restore the communication.
See also:
Ethernet Communication Setup
Advanced Communication Setup
Communication Setup
|