• « Back to Catalog
  • iPOS360x SX-CAN 4-Axis Motion System CANopen/Ethernet

  • iPOS360x SX-CAN 4-Axis Motion System CANopen/Ethernet Image
  • Motion system with up to 4 iPOS360x VX-CAN drive controllers
    For DC brushless, DC brush, stepper, linear, and voice coil motors
    Power voltage: 9-36 VDC; Logic voltage: 7-36 VDC
    Up to 4 A continuous, 10 A peak per drive
    CAN communication between axes
    RS-232 and Ethernet for setup
    Size (L x W x H): 98 x 100.3 x 21.2 mm

  • Product Details Datasheets Documentation/Software Connection Diagrams Contact Us

  • Electrical characteristics/axis:
          Motor supply / logic supply: 9 – 36 VDC
          Output current (iPOS3602/iPOS3604): 2/4 A continuous, 3.2/10 A peak current
    Motor types:
          Brushless DC motors (BLDC, PMSM motors)
          Brushed DC motors (DC motors)
          Stepper motors (2- or 3-phase)
          Voice coil actuators
          Linear motors
    Feedback options:
          Incremental encoder
          SinCos 1Vpp
          Digital Hall-sensors
          Analog Hall-sensors
    Control:
          Via CAN Bus, pulse and direction or analog/digital inputs
          Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
    Communication:
          RS232 - up to 115 Kbit/s
          CANopen - according to CiA profiles 301, 305 and 402
          TMLCAN - Technosoft proprietary CAN protocol
          Ethernet - optional via an additional communication module
    Digital and analog inputs/outputs:
          4x5 digital inputs: 5-36 V, NPN
          4x4 digital outputs: 5-36 V, 0.5 A, NPN
          4x2 analog input: 12 bit, 0-5 V
          Possibility to use a digital output for controlling an external motor/holding brake
          Integrated brake chopper function for controlling an external braking resistor
    Safety: Protection against over-current, over-temperature, under-voltage and over-voltage, I2t and following error.
    Control features:
          Sinusoidal commutation with field-oriented control (FOC) via encoder, Hall sensors or sensorless.
          Fast and accurate control loop structure with customizable sampling rate and PWM frequency up to 100KHz
          Outstanding resonance and vibration suppression through the flexible, simultaneous use of 2 BiQuad filters.
          Closed-loop with sinusoidal commutation and field-oriented control (FOC) when encoder available.
          Open loop with up to 512 microsteps per full step, step loss detection and automatic position compensation when encoder available on the load.
    Operating modes:
          Position, speed and torque control
          Path generator with trapezoidal and sinusoidal ramps
          Profile Position Mode, Velocity Mode, Homing Mode
          Interpolated position with linear (PT) and cubic splines (PVT)
          Cyclic Synchronous Position (CSP)
          Electronic gears (EGEAR) and cams (ECAM)
          Motion contouring via position, speed, torque or voltage
          Analogue external reference, pulse and direction
    EasyMotion Studio-Software:
        Graphic programming interface with many functions and wizards for simple commissioning, configuration and local programming of complex sequence programs in single-axis or multi-axis systems.
          Enables the selection of motor type, encoder interface and control structure as well as the setting of protection and controller parameters.
          Automatic determination of the PID controller parameters (autotuning).
          Extended analysis and optimization tools integrated using the control panels, loggers and scope functionalities.
    TML Library: The TML Motion Libraries can work under Windows (32-bit and 64-bit versions available), or Linux operating system and can be included in an application developed under C/C++, C#, Visual Basic, Delphi Pascal, or LabVIEW. TML_Lib is a collection of high-level functions allowing to control, from a PC, the Technosoft intelligent drives and motors. The protocol is TML and communication can take place via RS232, CAN bus, Ethernet or USB.
    Technosoft Motion Language (TML) programming language: Using the TML language, different operating modes, movement profiles, reference runs or the control of complex sequence programs can be graphically programmed and executed autonomously. The drive controllers can process analog and digital I / O signals, perform arithmetic and logical operations, and also exchange data and commands between the axes. Single-axis and multi-axis stand-alone applications can be easily implemented with self-created sequence programs, even without the use of a complex CANopen or EtherCAT master controller.
    MotionChip ™ technology: The main core of all Technosoft servo controllers is the MotionChip ™ - an intelligent, freely programmable motion controller specially designed for complex motion control tasks. The MotionChip ™ offers the possibility to use the powerful digital signal processors (DSP) from Texas Instruments as an independent, intelligent unit. As a result, many tasks of a complex master control are solved directly by the MotionChip ™, so that the global function of a machine is relieved and the management of a master application can be optimized. All-important control functions of a controller such as a multitude of operating modes, PLC properties, protection and safety functions as well as support for the different interface and motor technologies are accommodated on the MotionChip ™, thus enabling flexible use in a wide variety of drive systems.

  • Product details

  • Product features

  • Supply Voltage:
  • 12 V,24 V,36 V
  • Output Current - Nominal:
  • 4x4 A
  • Continuous/Peak Current:
  • 2/3 A,4/10 A
  • Communication:
  • RS-232,CANopen / TMLCAN,Ethernet
  • Controlled Motors:
  • DC Brushless,DC Brushed,Linear,Stepper,Voice Coil
  • Sensors:
  • Incremental,1Vpp Sin/Cos,Digital Halls,Analog Halls,Tacho,Sensorless
  • Motion Control:
  • Control Functions (Position-Speed-Torque),Electronic Gearing,Electronic Camming
  • Digital Inputs:
  • 4x5
  • Digital Outputs:
  • 4x4
  • Analog Inputs:
  • 4x2
  • Datasheets

  • Card Front
    iPOS360x SX Multi-axis – Datasheet
    Card Front
    iPOS3604 VX-CAN – Datasheet
    Card Front
    iPOS3602 VX-CAN – Datasheet
    Card Front
    iPOS360x SX-CAN Multi-axis – Cable set
  • Documentation/Software

  • Card Front
    iPOS360x SX Multi-axis – User manual
  •  EasyMotion Studio Demo
     Motion Libraries
     CANopen Programming Manual
     EDS file for CANopen
  • Connection Diagrams

  • Card Front
    iPOS360x SX Multi-axis – Connection diagram
  • Ordering information

  • P028.002.E884 – iPOS360x MBX-CAN motherboard (4 axes, iPOS360x VX, CAN)
    P028.002.E894 – iPOS360x MBX-NET motherboard (4 axes, iPOS360x VX, Ethernet compatible)
    P038.022.E001 – ENET-VX interface (Ethernet plug-in)
    P028.040.C179 – HC 4 x iPOS360x SX (housing & crimp pin set for the MBX 4-axis motherboard)
    P028.040.C198 – CCS 4 x iPOS360x SXE (Complete cable set, 100 cm, for the MBX 4-axis system: power, RS232, CAN, motor, single-ended encoder feedback, I/O)
    P028.040.C199 – CCS 4 x iPOS360x SXD (Complete cable set, 100 cm, for the MBX 4-axis system: power, RS232, CAN, motor, diff. encoder feedback, I/O)
    P034.001.E002 – EasyMotion Studio (software)
  • Contact Us

    • Your Name (required)

      Your Email (required)

      Inquiry Product Name

      Your Message

    • iPOS360x SX-CAN 4-Axis Motion System CANopen/Ethernet

    • iPOS360x SX-CAN 4-Axis Motion System CANopen/Ethernet Image
    • Electrical characteristics/axis:
            Motor supply / logic supply: 9 – 36 VDC
            Output current (iPOS3602/iPOS3604): 2/4 A continuous, 3.2/10 A peak current
      Motor types:
            Brushless DC motors (BLDC, PMSM motors)
            Brushed DC motors (DC motors)
            Stepper motors (2- or 3-phase)
            Voice coil actuators
            Linear motors
      Feedback options:
            Incremental encoder
            SinCos 1Vpp
            Digital Hall-sensors
            Analog Hall-sensors
      Control:
            Via CAN Bus, pulse and direction or analog/digital inputs
            Autonomous execution of complex motion sequences stored in the nonvolatile memory of the drive.
      Communication:
            RS232 - up to 115 Kbit/s
            CANopen - according to CiA profiles 301, 305 and 402
            TMLCAN - Technosoft proprietary CAN protocol
            Ethernet - optional via an additional communication module
      Digital and analog inputs/outputs:
            4x5 digital inputs: 5-36 V, NPN
            4x4 digital outputs: 5-36 V, 0.5 A, NPN
            4x2 analog input: 12 bit, 0-5 V
            Possibility to use a digital output for controlling an external motor/holding brake
            Integrated brake chopper function for controlling an external braking resistor
      Safety: Protection against over-current, over-temperature, under-voltage and over-voltage, I2t and following error.
      Control features:
            Sinusoidal commutation with field-oriented control (FOC) via encoder, Hall sensors or sensorless.
            Fast and accurate control loop structure with customizable sampling rate and PWM frequency up to 100KHz
            Outstanding resonance and vibration suppression through the flexible, simultaneous use of 2 BiQuad filters.
            Closed-loop with sinusoidal commutation and field-oriented control (FOC) when encoder available.
            Open loop with up to 512 microsteps per full step, step loss detection and automatic position compensation when encoder available on the load.
      Operating modes:
            Position, speed and torque control
            Path generator with trapezoidal and sinusoidal ramps
            Profile Position Mode, Velocity Mode, Homing Mode
            Interpolated position with linear (PT) and cubic splines (PVT)
            Cyclic Synchronous Position (CSP)
            Electronic gears (EGEAR) and cams (ECAM)
            Motion contouring via position, speed, torque or voltage
            Analogue external reference, pulse and direction
      EasyMotion Studio-Software:
          Graphic programming interface with many functions and wizards for simple commissioning, configuration and local programming of complex sequence programs in single-axis or multi-axis systems.
            Enables the selection of motor type, encoder interface and control structure as well as the setting of protection and controller parameters.
            Automatic determination of the PID controller parameters (autotuning).
            Extended analysis and optimization tools integrated using the control panels, loggers and scope functionalities.
      TML Library: The TML Motion Libraries can work under Windows (32-bit and 64-bit versions available), or Linux operating system and can be included in an application developed under C/C++, C#, Visual Basic, Delphi Pascal, or LabVIEW. TML_Lib is a collection of high-level functions allowing to control, from a PC, the Technosoft intelligent drives and motors. The protocol is TML and communication can take place via RS232, CAN bus, Ethernet or USB.
      Technosoft Motion Language (TML) programming language: Using the TML language, different operating modes, movement profiles, reference runs or the control of complex sequence programs can be graphically programmed and executed autonomously. The drive controllers can process analog and digital I / O signals, perform arithmetic and logical operations, and also exchange data and commands between the axes. Single-axis and multi-axis stand-alone applications can be easily implemented with self-created sequence programs, even without the use of a complex CANopen or EtherCAT master controller.
      MotionChip ™ technology: The main core of all Technosoft servo controllers is the MotionChip ™ - an intelligent, freely programmable motion controller specially designed for complex motion control tasks. The MotionChip ™ offers the possibility to use the powerful digital signal processors (DSP) from Texas Instruments as an independent, intelligent unit. As a result, many tasks of a complex master control are solved directly by the MotionChip ™, so that the global function of a machine is relieved and the management of a master application can be optimized. All-important control functions of a controller such as a multitude of operating modes, PLC properties, protection and safety functions as well as support for the different interface and motor technologies are accommodated on the MotionChip ™, thus enabling flexible use in a wide variety of drive systems.

    • Motion system with up to 4 iPOS360x VX-CAN drive controllers
      For DC brushless, DC brush, stepper, linear, and voice coil motors
      Power voltage: 9-36 VDC; Logic voltage: 7-36 VDC
      Up to 4 A continuous, 10 A peak per drive
      CAN communication between axes
      RS-232 and Ethernet for setup
      Size (L x W x H): 98 x 100.3 x 21.2 mm

    • Product Details Datasheets Documentation/Software Connection Diagrams Contact Us

    • Product Features

    • Product Details

    • Analog Inputs:
    • 4x2
    • Supply Voltage:
    • 12 V,24 V,36 V
    • Communication:
    • RS-232,CANopen / TMLCAN,Ethernet
    • Controlled Motors:
    • DC Brushless,DC Brushed,Linear,Stepper,Voice Coil
    • Digital Inputs:
    • 4x5
    • 4x4
    • Digital Outputs:
    • Control Functions (Position-Speed-Torque),Electronic Gearing,Electronic Camming
    • Motion Control:
    • 4x4 A
    • Output Current - Nominal:
    • Incremental,1Vpp Sin/Cos,Digital Halls,Analog Halls,Tacho,Sensorless
    • Sensors:
    • 2/3 A,4/10 A
    • Continuous/Peak Current:
    • Data Sheets

    • Card Front
      iPOS360x SX Multi-axis – Datasheet
      Card Front
      iPOS3604 VX-CAN – Datasheet
      Card Front
      iPOS3602 VX-CAN – Datasheet
      Card Front
      iPOS360x SX-CAN Multi-axis – Cable set
    • Doc. / Software

    • Card Front
      iPOS360x SX Multi-axis – User manual
    •  EasyMotion Studio Demo
       Motion Libraries
       CANopen Programming Manual
       EDS file for CANopen
    • Connections diagrams

    • Card Front
      iPOS360x SX Multi-axis – Connection diagram
    • Ordering Information

    • P028.002.E884 – iPOS360x MBX-CAN motherboard (4 axes, iPOS360x VX, CAN)
      P028.002.E894 – iPOS360x MBX-NET motherboard (4 axes, iPOS360x VX, Ethernet compatible)
      P038.022.E001 – ENET-VX interface (Ethernet plug-in)
      P028.040.C179 – HC 4 x iPOS360x SX (housing & crimp pin set for the MBX 4-axis motherboard)
      P028.040.C198 – CCS 4 x iPOS360x SXE (Complete cable set, 100 cm, for the MBX 4-axis system: power, RS232, CAN, motor, single-ended encoder feedback, I/O)
      P028.040.C199 – CCS 4 x iPOS360x SXD (Complete cable set, 100 cm, for the MBX 4-axis system: power, RS232, CAN, motor, diff. encoder feedback, I/O)
      P034.001.E002 – EasyMotion Studio (software)
    • Contact Us

      • Your Name (required)

        Your Email (required)

        Inquiry Product Name

        Your Message