Demo Software
| EasyMotion Studio II is the new PC software for Technosoft intelligent drives/motors setup and motion programming. |
| The EasyMotion Studio Demo is a Windows software allowing you to evaluate the features of the EasyMotion Studio setup / programming platform for Technosoft drives.
Download the setup: |
| The EasyMotion Studio II – Quick Setup and Programming Guide explains how to use EasyMotion Studio II to program the Technosoft intelligent drives and motors with complex motion applications using Technosoft Motion Language (TML). |
| The Motion Programming using EasyMotion Studio Manual explains how to use EasyMotion Studio to program the Technosoft intelligent drives and motors with complex motion applications using Technosoft Motion Language (TML). |
| This manual includes a detailed description of both the TML language and EasyMotion Studio’s Motion Wizard which automatically generates TML instructions starting from user friendly dialogues. |
| The Introduction to TML Manual presents an overview of the Technosoft Motion Language (TML) — a high-level set of instructions that can be used to configure and parameterize Technosoft intelligent drives and to execute advanced motion operations in stand-alone or on-line modes. For a detailed description of TML see above (the Motion Programming using EasyMotion Studio Manual). |
| The CANopen Programming User Manual describes how to program the CANopen versions of Technosoft intelligent drives. These drives support the CANopen protocol in conformance with the DS-301 communication profile and the DSP-402 device profile. |
| The CoE Programming User Manual describes how to program the EtherCAT versions of Technosoft intelligent drives using the CAN Application Layer over EtherCAT (CoE) protocol |
Our manuals and data sheets are available for download on the product pages
+41 (0)32 566 70 43
Tel.: +49 (0)8331 924 7293
Mobile: +49 (0)170 521 0007
Tel.: +49 (0)7156 308 8018
Mobile: +49 (0)173 772 0003