Technosoft exhibits at LogiMAT trade fair in Hall 2 Stand C25

Visit us in Stuttgart, Hall 2 Stand C25, May 31- June 2 and experience the production of tomorrow

We present innovative designs for cost effective and reliable drive solutions : the iPOS8010 and iPOS8020 intelligent drives, the iGVD71 intelligent drives and iMOTIONCUBE, an extremely compact drive that you can integrate in your design as a plug-in module.

Our engineers will be available to discuss your application requirements and advise about the most effective solution to your motion control requirements. Our iPOS drives with embedded motion controller and iMOT intelligent motors will be exhibited with demo examples specifically built to prove their unique capabilities.

• Fully digital drive with embedded motion controller

• For brushless, DC brush, step & linear motors
• Motor supply: 12-80 V, logic supply: 12-36 V
• Output current: 10 A continuous, 20 A peak
• EtherCAT communication
• STO inputs with safety integrity level SIL3/Cat3/PLe
• Incremental & absolute encoders, resolvers
• Size: 139 x 94 x 25 mm (~5.47 x 3.7 x 0.98 in)

The iPOS8010 and iPOS8020 intelligent drives are based on a new modular concept of panel-mounted drives, offering a very compact, cost-effective solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 800 W or 1600 W, with up to 80 V rated voltages.

Using either CAN or EtherCAT as field bus, the iPOS8010 and iPOS8020 units embed motion controller, drive and PLC features into a single unit. The CAN versions can operate as standard CANopen drives, or as intelligent drives that can execute complex motion profiles, programmed directly at drive level with the high level Technosoft Motion Language (TML). As intelligent drives, they can perform many of the central unit’s tasks, eliminating the need for such a device in many single or multi-axis applications. The EtherCAT versions can also operate as standard EtherCAT drives (CoE protocol) or as intelligent slaves that can independently execute complex motion functions from the drive’s memory.

Having 2 feedback connectors, the iPOS8010 and iPOS8020 drives can use both motor and load position in advanced dual-loop control algorithms that minimize the transmission backlash negative effects. Depending on the model, various combinations of incremental encoders (quad or sine/cosine), resolvers and absolute encoders (SSI, BiSS, EnDAT, Hiperface, Absolute A) can be used. The iPOS80x0 BX models support the functional safety requirements with 2 STO inputs offering the integrity level SIL3/Cat3/PLe that eases the integration of the Technosoft drive into safety related installations.”.

The iPOS80x0 drives can be quickly configured and tuned using either of Technosoft’s software platforms, EasySetUp or EasyMotion Studio. EasySetUp is recommended when motion programming is done exclusively via an external device (a PC or PLC using Technosoft motion libraries, a CANopen or EtherCAT master), while EasyMotio Studio includes both drive setup and motion programming using TML.

The iGVD71 intelligent drives are based on a new design concept that has result in cost-effective, compact, high power solution suitable for position, speed or torque control of any DC or brushless motor in battery supplied applications. These drives are mostly suited for AGV and warehouse automation.

• Motion controller and drive in a single compact unit, high current low voltage
• Universal solution for control of brushless, brushed and 3-phase step motors
• Motor supply: 80 V
• Output current: 100 A continuous; 120 A peak
• STO (SIL3/Cat3/PLe)
• CANopen communication

• Fully digital drives with embedded motion controller
• For brushless, DC brush and step motors
• Motor supply: 12-80 V; logic supply 12-36 V
• Output current: 20 A continuous (with heat sink), 40 A peak
• TMLCAN & CANopen communication
• Drive enable circuit
• Size : 60 x 40 x 26 mm (~2,36 x 1.57 x 1.02 in)

iMOTIONCUBEis an extremely compact drive that you can integrate in your design as a plug-in module. It provides a cost-effective solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 1.6 kW, with up to 80 V rated voltages.

Using as field bus either CAN or (in preparation) EtherCAT, iMOTIONCUBEs embed motion controller, drive and PLC features into a single unit. The CAN versions may operate as standard CANopen drives, or as intelligent drives that are able to execute complex motion profiles, programmed directly on the drive, with the high-level Technosoft Motion Language (TML). As an intelligent drive, iMOTIONCUBE can perform many of the central unit’s tasks, eliminating the need for such a unit in many single-axis or multi-axis applications. The EtherCAT versions can also operate as standard EtherCAT drives (CoE protocol), or as intelligent slaves that are able to independently execute complex motion functions from the drive’s memory.

Having 2 feedback connectors, iMOTIONCUBE can use both motor and load position in advanced dual-loop control algorithms that minimize the transmission backlash negative effects. iMOTIONCUBE has a drive enable circuit.

iMOTIONCUBE drives can be quickly configured and tuned using either EasySetUp or EasyMotion Studio software platforms. EasySetUp is recommended when motion programming is done exclusively via an external device (a PC or PLC using Technosoft motion libraries, a CANopen or EtherCAT master), while EasyMotio Studio includes both drive setup and motion programming using TML.

LogiMAT is the international specialist trade show for intralogistics solutions and process management.

This Trade Show offers you a full market overview of everything that is happening in the intralogistics industry: from procurement to production and delivery. Right at the start of the year, international exhibitors display innovative technologies, products, systems and solutions for the streamlining, process optimisation and cost reduction of internal logistics processes.

More information at: https://www.logimat-messe.de/en

Find the best solutions for your application

Going to the event? Let’s meet up to discuss

Thank you for your interest in Technosoft products. Please complete the form below to schedule a meeting, demo or for more information about an event!