Having a capability of 8 A continuous / 20 A peak current at up to 80 V, the iPOS8010 BX-CAT controller offers a very compact, cost-effective universal solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 800 W and voltages up to 80 V. Based on the MotionChip™ technology, iPOS8010 BX-CAT can operate either as a standard EtherCAT drive that accepts the CAN application protocol over EtherCAT (CoE), or as an intelligent drive that can be programmed to execute complex motion profiles directly at drive level, using its built-in motion controller [...]

Designed to cover medium-to-high volume applications, the iPOS family of drives can be delivered either as open-frame, plug-in modules with vertical (VX models) or horizontal (MX models) mounting on the user’s main board, or as a closed-frame boxes equipped with retractable connectors (BX models). iPOS4808 BX-CAT is the first BX drive with an EtherCAT interface. Having a high current capability (8 A continuous, 20 A peak), the iPOS4808 BX-CAT drive offers a very compact, cost-effective universal solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 400 W and voltages up to [...]

Technosoft announces the new iPOS3602 BX-CAN and iPOS3604 BX-CAN drives, based on the IPOS family design concept of closed-frame intelligent drives. Equipped with a CAN interface, the iPOS360x BX intelligent drives offer a very compact solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 144 W and 36 V nominal voltage. iPOS360x BX are able to drive 2 A (iPOS3602 BX) or 4 A (iPOS3604 BX) continuous currents and 3.2 A (iPOS3602 BX) or 10 A (iPOS3604 BX) peak currents at a supply voltage ranging from 12 to 36 Vdc, [...]

Complex motion control applications often require the design of custom systems. This process is usually expensive and time consuming for the project developers. The new Technosoft multi-axis motion system – iPOS360x SX – makes this phase faster and easier, giving the designer an extremely compact (100 x 98 x 37 mm) ready-to-run solution based on the new family of Technosoft iPOS drives. iPOS360x SX allows you to plug in up to four iPOS3602 VX or iPOS3604 VX intelligent drives and provides all the necessary connectors (motor, encoder feedback and I/O signal) for each drive. The drives are connected through a CAN-bus link. Two CAN-bus connectors [...]