The default CAN baud rate for a Technosoft drive is 500 kbps. A drive can be set to use a different CAN baud rate than the default one by selecting one of the available entries in the Drive Setup dialogue in EasySetup / EasyMotion Studio. Valid values are: 125 kbps, 250 kbps, 500 kbps and 1 Mbps. Please check the picture below for reference:

After the required baud rate is selected, please click on the OK button to validate the selection.

Establish the communication (on RS232 preferably) to the drive and download the setup to it. The new CAN baud rate will be available after a drive reset (or power cycle).