11 08, 2018

How to download a SW file with TML instructions

2023-02-14T14:32:48+00:00

The steps described below can be integrated in a host software to add the possibility of updating TML application/setup table in the field. The data stored in a software file is grouped in blocks separated by an empty row. The first row in a block represents the start address of the data block. The following [...]

How to download a SW file with TML instructions2023-02-14T14:32:48+00:00
11 08, 2018

How to download a software file with EEPROM Programmer [GB/CM]

2023-02-14T14:36:48+00:00

The user can create a software file (with extension .sw) which contains all the data to write into the non-volatile memory of the drive using the EasyMotion Studio or Easy SetUp software. The software file includes both the setup data and the motion program. The software files generated by EasySetUp include only the setup data. The .sw file can be downloaded in drive non-volatile memory with [...]

How to download a software file with EEPROM Programmer [GB/CM]2023-02-14T14:36:48+00:00
11 08, 2018

How to generate and download a software file [GB]

2023-02-14T14:39:03+00:00

A software file (.sw) is a text file that can be generated either from EasySetUp or from EasyMotion Studio, and which generally contains information about the drive/motor setup and about the TML application (if present). The data inside the file is organized in blocks separated by an empty row. Each block of data starts with the block start address, followed by data values to be placed [...]

How to generate and download a software file [GB]2023-02-14T14:39:03+00:00