EasyMotion Studio / EasySetUp is able to communicate directly over the CAN bus with Technosoft drives, via one of the following PC-to-CAN-bus interfaces:
1) IxxAT PC to CAN interface (http://www.ixxat.com/)
2) Sys Tec USB to CAN interface (http://www.systec-electronic.de/)
3) ESD PC to CAN interface (http://www.esd-electronics.com/)
4) PEAK System PCAN-PCI interface (http://www.peak-system.com/)
5) PEAK System PCAN-ISA (http://www.peak-system.com/)
6) PEAK System PC/104 (http://www.peak-system.com/)
7) PEAK System Dongle interfaces (http://www.peak-system.com/)
o Dongle using SPP/EPP protocol
o Dongle with SJA chipset using SPP/EPP protocol
o Dongle Pro with SJA chipset using SPP/EPP protocol
8) Lawicel USB to CAN interface (http://www.canusb.com/)
9) Kvaser Leaf Light HS USB to CAN interface (http://http://www.kvaser.com//)
To use a CAN-bus interface, you need to install on your PC the CAN-bus driver for the chosen interface. For each CAN-bus interface, the manufacturer of the interface provides the driver as well as the installation guidelines.
Remark:
- CAN-bus interfaces from PEAK System require that the DLL interface be present in the installation folder of EasyMotion Studio.
- The default baud rate for CAN communication on Technosoft drives is 500 kbps.
TML_Lib for Windows and LabVIEW:
- IxxAT PC to CAN interface
- Sys Tec USB to CAN interface
- ESD PC to CAN interface
- LAWICEL CANUSB interface
- PEAK System PCAN-PCI interface
- PEAK System PCAN-ISA
- PEAK System PC/104
- PEAK System PCAN-USB
- PEAK System Dongle interfaces
o Dongle using SPP/EPP protocol
o Dongle with SJA chipset using SPP/EPP protocol
o Dongle Pro with SJA chipset using SPP/EPP protocol
TML_Lib for Linux:
- IxxAT PC to CAN interfaces supported by Basic CAN Interface
- ESD PC to CAN interface
- LAWICEL CANUSB interface
- PEAK System PCAN-ISA
- PEAK System PC/104
- PEAK System USB to CAN