Intelligent brushless motor with embedded motion controller, position feedback, RS232 and EtherCAT interface. The integrated control system reduces the amount of wiring required for power supply and communication, and improves electromagnetic compatibility significantly. The intelligent motor is already optimally designed, ready for immediate operation and thus enables simple integration in small spaces.
Electrical characteristics:
      Operating voltage: 12 - 48 VDC / nominal current: 3.6 A
      Nominal torque: 240 mNm @ 4000 rpm
Communication:
      RS232 - up to 115 Kbit/s
      EtherCAT - with CANopen over EtherCAT (CoE) protocol
Digital and analog inputs/outputs:
      4 digital inputs: 5-24 V, NPN or PNP configurable
      2 digital outputs: 5-24 V, 0.5 A, NPN Open-Collector
      1 analog input: 12 bit, 0-5 V
Feedback: Integrated magnetic single-turn absolute encoder with a resolution of 4096 increments per revolution (12 bit).
Safety: Protection against over-current, over-temperature, under-voltage and over-voltage, I2t and following error.
Control features:
      Via EtherCAT bus or analog / digital inputs
      Through autonomous execution of complex motion sequences directly from the non-volatile memory of the integrated controller
Operating modes:
      Position, speed and torque control
      Trajectory generator with trapezoidal and sinusoidal ramps
      Profile Position Mode, Velocity Mode, Homing Mode
      Profile Position Mode, Velocity Mode, Homing Mode
      Cyclic Synchronous Position (CSP), Velocity (CSV), Torque (CST)
      Electronic gears (EGEAR) and cams (ECAM)
      Motion contouring via position, speed, torque or voltage
      Analogue external reference, pulse and direction
EasyMotion Studio software:
     Graphic programming interface with many wizards for simple commissioning, configuration and local programming of complex sequence programs in single-axis or multi-axis systems
      Straightforward selection of motor type, encoder interface and control structure as well as the configuration of the protections and controller parameters
      Automatic determination of the PID controller parameters (autotuning)
      Extended analysis and optimization tools integrated using the control panels, loggers and scope functionalities
Technosoft Motion Language (TML) : Using the TML language, different operating modes, movement profiles, reference runs or the control of complex sequence programs can be graphically programmed and executed autonomously. The drive controllers can process analog and digital I / O signals, perform arithmetic and logical operations, and also exchange data and commands between the axes. Single-axis and multi-axis stand-alone applications can be easily implemented with self-created sequence programs, even without the use of a complex CANopen or EtherCAT master controller.
MotionChip ™ technology: The main core of all Technosoft servo controllers is the MotionChip ™ - an intelligent, freely programmable motion controller specially designed for complex motion control tasks. The MotionChip ™ offers the possibility to use the powerful digital signal processors (DSP) from Texas Instruments as an independent, intelligent unit. As a result, many tasks of a complex master control are solved directly by the MotionChip ™, so that the global function of a machine is relieved and the management of a master application can be optimized. All-important control functions of a controller such as a multitude of operating modes, PLC properties, protection and safety functions as well as support for the different interface and motor technologies are accommodated on the MotionChip ™, thus enabling flexible use in a wide variety of drive systems.