About Valentina Dumitru

This author has not yet filled in any details.
So far Valentina Dumitru has created 123 blog entries.
11 04, 2025

Technosoft drives are equipped with integrated hardware and software protections to ensure a reliable operation in critical situations

2025-04-11T12:03:22+00:00

Introduction In motor control applications, unexpected failures can pose serious safety risks, cause damage to equipment, costly repairs, and disrupt productivity. Therefore, the ability of a system to effectively handle critical errors is essential. Technosoft drives are designed with a robust protection system that combines both hardware and adaptive software, ensuring reliable operation and preventing [...]

Technosoft drives are equipped with integrated hardware and software protections to ensure a reliable operation in critical situations2025-04-11T12:03:22+00:00
3 04, 2025

EasyMotion Studio software simplifies the setup and tuning of motion control systems, reducing development time

2025-04-03T08:26:35+00:00

Enhanced Drive Configuration with Easy Motion Studio II With Easy Motion Studio II, setting up a drive for your application is both quick and straightforward. Whether you're a beginner or an experienced user, this powerful software simplifies the configuration process while giving you the flexibility to tailor settings to meet your requirements. Intuitive Setup Process [...]

EasyMotion Studio software simplifies the setup and tuning of motion control systems, reducing development time2025-04-03T08:26:35+00:00
20 03, 2025

The BC90100 BX brake chopper module pairs with the Technosoft drives to protect your system from regenerative energy during rapid deceleration

2025-04-03T08:25:21+00:00

Overview Technosoft motion control drives are used in a plethora of industries and depending on the application type and characteristics, their power ranges from just a few watts to High Powered (8KW) applications, such as the AGV industry. Here the phenomenon of regenerative braking, although not limited only to the cases of high power applications, [...]

The BC90100 BX brake chopper module pairs with the Technosoft drives to protect your system from regenerative energy during rapid deceleration2025-04-03T08:25:21+00:00
13 03, 2025

The Micro 4804 family of miniature drives have a minimum voltage efficiency of 91% at 100 kHz PWM frequency?

2025-03-13T10:01:22+00:00

Introduction In the world of motion control applications, voltage efficiency helps increasing the overall performance of the motor control allowing higher speeds to be reached. The Micro 4804 family of miniature drives stand out by achieving an impressive 91% minimum voltage efficiency at 100 kHz PWM frequency, making them the perfect choice for compact, high-precision [...]

The Micro 4804 family of miniature drives have a minimum voltage efficiency of 91% at 100 kHz PWM frequency?2025-03-13T10:01:22+00:00
17 01, 2023

Technosoft exhibits at SPIE WEST PHOTONICS, San Francisco

2023-01-17T13:19:36+00:00

The Technosoft team will be present at SPIE WEST PHOTONICS, booth 5515, Jan.28-Feb.2, 2023, San Francisco. We invite you to visit our stand no 5515  where you will have the occasion to see the newest Technosoft products and discuss with our specialists about the requirements of your motion control applications. Going to [...]

Technosoft exhibits at SPIE WEST PHOTONICS, San Francisco2023-01-17T13:19:36+00:00
8 11, 2022

Motion control solutions for medical technology at COMPAMED, Düsseldorf 14-17 November 2022

2023-01-26T15:35:22+00:00

We are exhibiting at Compamed – the trade fair for suppliers and manufactures of medical technologies.The event takes place at the Messe Düsseldorf Hall on November 14-17, 2022 More compact, more power, more flexibility - the attributes that describe the essential features of the new iPOS line - the new range of complete motion [...]

Motion control solutions for medical technology at COMPAMED, Düsseldorf 14-17 November 20222023-01-26T15:35:22+00:00
24 10, 2022

Intelligent control for any applications at SPS, Nuremberg 8-10 November 2022

2023-01-26T15:36:52+00:00

We are exhibiting at SPS Smart Production Solutions. The event takes place at the Nuremberg Messe on November 8-10, 2022 More compact, more power, more flexibility - the attributes that describe the essential features of the new iPOS line - the new range of complete motion solutions with intelligent servo, stepper drives and intelligent [...]

Intelligent control for any applications at SPS, Nuremberg 8-10 November 20222023-01-26T15:36:52+00:00
4 10, 2022

Technosoft Technosoft exhibits at RoboBusiness & DeviceTalks West

2023-01-26T15:35:41+00:00

We invite you to visit our stand no 417 at RoboBusiness & DeviceTalks West, Santa Clara (19-20 October) where you will have the occasion to see the newest Technosoft products and discuss with our specialists about the requirements of your motion control applications. Going to the event? Let’s meet up to discuss [...]

Technosoft Technosoft exhibits at RoboBusiness & DeviceTalks West2023-01-26T15:35:41+00:00
30 09, 2022

Intelligent drives and motors at Engineering Design Show, Coventry, 12-13 October 2022

2023-01-26T15:36:06+00:00

Visit Technosoft at the Engineering Design Show exhibition in Coventry, Booth B54 and get to know  iPOS4803 micro and   iPOS481x MZ&XZ Our engineers will gladly discuss your application requirements with you and advise you on the most efficient solution for your motion control requirements. We present our iPOS drives with integrated motion [...]

Intelligent drives and motors at Engineering Design Show, Coventry, 12-13 October 20222023-01-26T15:36:06+00:00
15 09, 2022

Intelligent drives and motors at Micronora, Besancon, 27-30 September 2022

2023-01-26T15:36:28+00:00

Visit Technosoft at the Micronora exhibition in Besancon, Booth C714 and get to know  iPOS4803 micro and   iPOS481x MZ&XZ Our engineers will gladly discuss your application requirements with you and advise you on the most efficient solution for your motion control requirements. We present our iPOS drives with integrated motion controller and [...]

Intelligent drives and motors at Micronora, Besancon, 27-30 September 20222023-01-26T15:36:28+00:00
©  TECHNOSOFT ,   All Right Reserved  |  Privacy Policy  | Site map